Jura C-D-E-F-ENA-GIGA PTFE Hose 240mm
Dimensions: 4x2.5x240mm
In the Jura C-D-E-F models, the 240mm Pressure Hose leads from the
Outlet Valve of the Thermoblock to the Brew Group Drain Valve at the bottom of the brewing unit. If no angled connection is present at the Drain Valve, then you need the complete hose set 10027. This is because a valve was added to prevent hose kinking and improve the brew process. This hose will be too short without the added valve.
This 240mm hose is also located in the ENA Line and GIGA Line. In the ENA models, it connects the Membrane Regulator to the Thermoblock. In the GIGA, it connects the Solenoid Valve and Thermoblock.
Model Line:
|
Model:
|
Model Number:
|
Jura Capresso-Impressa C-Line:
|
C5 - C9 - C50 - C55 - C60 - C65 - C70 - C90
|
13531 - 13422 - 13452 - 13681 - 13739 - 15006 - 15068
|
Jura D-Line:
|
D4 - D6 - D60
|
15215 - 15216 - 15199
|
Jura Capresso-Impressa E-Line:
|
E5 - E8 - E9 - E10 - E20 - E25 - E30 - E40 - E45 - E50 - E55 - E60 - E65 - E70 - E74 - E75 - E80 - E85
|
15070 - 13187 - 15109 - 13204
|
Jura Capresso ENA Line:
|
ENA 3 - ENA 4 - ENA 5 - ENA 7 - ENA 9
|
13466 - 13421 - 13382 - 13500 - 13572
|
Jura Capresso-Impressa F-Line:
|
F5 - F7 - F8 - F9 - F50 - F55 - F70 - F90 - XF50 - XF70
|
13185 - 13412 - 13345 - 13413 - 13171 - 13188 - 13684 - 15005 - 15065 - 13273
|
Jura GIGA Line:
|
GIGA 10 - GIGA W3 - GIGA X8 - GIGA X9
|
15527 - 15089 - 15226 - 15392
|
In the Jura C-D-E-F models, the 240mm Pressure Hose leads from the
Outlet Valve of the Thermoblock to the Brew Group Drain Valve at the bottom of the brewing unit. If no angled connection is present at the Drain Valve, then you need the complete hose set 10027. This is because a valve was added to prevent hose kinking and improve the brew process. This hose will be too short without the added valve.
This 240mm hose is also located in the ENA Line and GIGA Line. In the ENA models, it connects the Membrane Regulator to the Thermoblock. In the GIGA, it connects the Solenoid Valve and Thermoblock.