Jura E-J-S-WE-X-Z-Giga6 Brew Group Repair Kit & Key

This Jura Brew Group Repair Kit contains all of the necessary O-Rings to refurbish the Brew Group of the models listed below. Viewing from left to right, the 2 larger red O-Rings are for the Brew Group Pistons. The black O-Ring is for the Riser Tube. The 2 blue O-Rings are for Pressure Hose connections. Some models may not need both hose connector O-Rings. The 2 red Nut Seals are located in the Drain Valve of the Brew Group. The red O-Ring is located on the outside of the Brew Group, which is called the Vacuum Nozzle. The last 4 O-Rings are all located in the Drain Valve, As well. The largest goes on the Extension Arm of the Drain Valve. The next 2 black O-Rings seal the connection of the Extension Arm and Fluid Nipple. The last black O-Ring is located on the Fluid Nipple. We recommend adding the Metal Cap for the pusher rod. It is a NON-OEM part that replaces the white plastic cap. It is a permanent fix for the malfunctions caused by a broken plastic cap.

• Error 8