Jura Impressa J9-J90-J95 Drip Tray
The Drip Tray catches excess water/coffee while the machine is operating. When the drip tray fills to its max capacity, the water level reaches the bottom of the metal contact, creating an electrical circuit. The current travels to the micro-switch and then to the board to signal to the user that the drip tray needs to be emptied.
Before replacing any parts, try gently removing the metal contacts from the drip tray. Clean the contacts and the drip tray where the contacts rest with soap and water. Accumulation of wet grounds in this vicinity will cause a false reading that the drip tray needs to be emptied. Make sure the contacts on the tray and the internal contacts are completely dry.
- Error: You receive "Drip Tray Missing" message when it is fully inserted in the machine.
- Fix: You may need to clean or replace the metal contacts on the drip tray. Many models have a micro-switch that is activated when the Drip Tray is inserted. The contacts on the micro-switch may be corroded or the lever may be broken. Visually check the switch and replace, if necessary.