 |
Jura C5-C9-D4-D6-F7-F8-F9-F50-E8 Coffee Grounds Container Tray
The
Coffee Grounds Container sits on this tray. When the brew process is complete, the Brew Group dumps the used coffee grounds into the container that sits on this pull out tray. The coffee grounds container tray is also responsible for activating an internal microswitch, D45X (10208), which notifies the CPU that the tray is inserted and can proceed with the next step in operation. The lever to the microswitch may break, or become stuck, and the machine will no longer register that the tray is inserted. Furthermore, if the tabs are broken on the rear of the coffee grounds container tray, the machine may register an "Empty Grounds" message, even if the grounds container is empty. The coffee grounds container tray needs to be replaced, if this occurs.
Note:The Jura Impressa F7, F8, F9, F85 Models were redesigned. This tray is only used in the OLDER aforementioned models. It does not fit the Jura F7 Aroma+, F8 TFT, F9 Aroma+ or F85. Click Here for the new version.
Model Line:
|
Model:
|
Model Number:
|
Jura Capresso-Impressa C-Line:
|
C5 - C9 - C50 - C55 - C60 - C65 - C70 - C90
|
13531 - 13422 - 13452 - 13681 - 13739 - 15006 - 15068
|
Jura D-Line:
|
D4 - D6 - D60
|
15216 - 15199
|
Jura Capresso-Impressa E-Line:
|
E5 - E8 - E9 - E10 - E20 - E25 - E30 - E40 - E45 - E50 - E55 - E60 - E65 - E70 - E74 - E75 - E80 - E85
|
13187 - 13204
|
Jura Capresso-Impressa F-Line:
|
F5 - F7 - F8 - - F9 - F50 - F55 - F70 - F90
|
13185 - 13412 - 13345 - 13413 - 13171 - 13188 - 13684 - 15005 - 15065 - 13273
|
- (1) Coffee Grounds Container Tray
The
Coffee Grounds Container sits on this tray. When the brew process is complete, the Brew Group dumps the used coffee grounds into the container that sits on this pull out tray. The coffee grounds container tray is also responsible for activating an internal microswitch, D45X (10208), which notifies the CPU that the tray is inserted and can proceed with the next step in operation. The lever to the microswitch may break, or become stuck, and the machine will no longer register that the tray is inserted.
|
|
 |