Categories:  
How To Replace Jura F8 Water Filter
Last Updated: 03/02/2020

How To Replace Jura F8 Water Filter

  • The Jura F8 coffee machine will display READY/FILTER when the Water Filter needs to be replaced.
  • Switch off the Jura coffee machine using the ON/OFF button.
  • Press the maintenance key until the following machine displays CHG FILTER/OPEN TAP.
  • Remove the Water Tank from the machine and empty it.
  • Open the Water Filter Holder and remove the old Water Filter. Install the new Water Filter in the Water Tank by exerting slight pressure to properly secure.
  • Push down the Filter Holder until it clicks into place.
  • Fill the Water Tank with cold, fresh tap water and reinstall it.
  • Place a container under the Frother and open the Steam/Hot water tap.
  • RINSING FILTER will be displayed.
  • CLOSE TAP will be displayed when the Water Filter is finished rinsing.
  • HEATING, then READY will be displayed when the Jura F8 is ready for operation.


Was this article helpful?

Comments:
 

Related Articles
 > How to Replace Jura A5 Water Filter
 > How to Replace Jura A9 Water Filter
 > How to Replace Jura C5 Water Filter
 > How to Replace Jura C9 Water Filter
 > How To Replace Jura A1 Water Filter
 > How To Replace Jura A7 Water Filter
 > How To Replace Jura C60-C65 Water Filter
 > How To Replace Jura E8 P.E.P. Smart Water Filter
 > How To Replace Jura ENA 9 Water Filter
 > How To Replace Jura ENA 4 Water Filter
 > How To Replace Jura ENA 3 Water Filter
 > How To Replace Jura ENA 5 Water Filter
 > How To Replace Jura ENA 7 Water Filter
 > How To Replace Jura ENA Micro 1 Water Filter
 > How To Replace Jura ENA Micro 5 Water Filter
 > How To Replace Jura ENA Micro 9 Water Filter
 > How To Replace Jura F7 Water Filter
 > How To Replace Jura Impressa F7 Water Filter