Jura Capresso-Impressa S7 Avantgarde Black Drip Tray

Error messages related to Drip Tray:

• "Empty Tray": box-sizing: border-box;The Drip Tray catches excess water/coffee while the machine is operating. box-sizing: border-box; When the drip tray fills to its max capacity, the water level reaches the bottom of the metal contact, creating an electrical circuit. The current travels to the micro-switch and then to the board to signal to the user that the drip tray needs to be emptied. box-sizing: border-box;Before replacing any parts, try gently removing the metal contacts from the drip tray. Clean the contacts and the drip tray where the contacts rest with soap and water. box-sizing: border-box; Accumulation of wet grounds in this vicinity will cause a false reading that the drip tray needs to be emptied. box-sizing: border-box; box-sizing: border-box; Make sure the contacts on the tray and the internal contacts are completely dry.



• "Tray Missing": If you receive this message when the drip tray is fully inserted in the machine, you may need to clean or replace the metal contacts on the drip tray. Most models have a micro-switch that is activated when the Drip Tray is inserted, which in turn, relays the message to the electronic board. The contacts on the micro-switch may be corroded or the lever may be broken. Furthermore, the internal drip tray contacts may need to be cleaned. You can clean the internal contacts with a Q-tip soaked in a light cleaning agent.