Jura Capresso-Impressa Z7-Z9 Coffee Dispensing Spout
The Z7-Z9 Coffee Dispensing Spout is secured with a T9 Torx Screw. It contains an o-ring to create a tight seal and prevent leaking during operation. Remove the screw, then pull the spout towards you. If the black piece with the O-Ring broke off in the spout, use plyers to remove.
|
Model Line:
|
Model:
|
Model Number:
|
|
Jura Capresso-Impressa Z-Line:
|
Z7 - Z9
|
13549 - 13752
|