Home > Repair Services > Jura Coffee Machine Repair Service

Jura Coffee Machine Repair Service

Disclaimer:

We are an independent repair facility that specializes solely in the repair of Jura coffee machines. We do not accept warranty work, nor do we accept any machine that is currently under the manufacturer's warranty. If your warranty is still in effect, please contact the company that you purchased the machine from, as we are not affiliated with Jura, Inc. or any entity authorized or supported by Jura, Inc.

In the rare occurrence your coffee machine is deemed irreparable by our technicians, a fee of $175 will be charged for labor, packaging and return shipping costs, which must be paid before the coffee machine is returned. The coffee machine will be returned in the same condition it arrived at our facility. However, if you wish to scrap your coffee machine, a full refund will be issued, as well as a maximum $100 buyout credit (Based upon usable parts in the machine. Some machines may not be offered a buyout credit due to condition). This is an extenuating circumstance that occurs when: I. The machine arrives severely damaged due to misuse or improper packaging. II. Parts required for the repair are no longer available from the manufacturer, most often thermoblocks and electronic boards. III. Our technicians deem the repair cost exceeds the true market value of the machine. The age of the machine, present/future part availability and our technician's evaluation of the key heating elements are all factors we use to determine the value.

Please follow our packaging instructions. We do not insure inbound shipments; it is up to the client to properly secure his/her coffee machine with enough packing materials to make for safe transit. Our shipping department ensures that all machines leaving our facility are packaged within the guidelines set forth by FedEx. Please read this entire page before shipping your machine to our facility. Completing a repair appointment request form implies that you have read and agreed to all terms and conditions and that you authorize Jura-Parts Com Co. to refurbish your Jura coffee machine(s).

*Do not ship any externals, including water tank, drip tray, drip tray grid, grounds container, grounds container tray, pre ground chute, pre ground lid, aroma lid, water tank lid, bean lid. If any lids are too difficult to remove, such as the Z line coffee lid, please do not remove.

We do not accept machines from the following locations:

  • Alaska
  • Hawaii

Index:


SERVICE OVERVIEW

Jura Capresso-Impressa coffee machines were built to last; however, your machine will need a tune-up from time-to-time. The brew group may become sluggish (Error 8) or your espresso may not be as strong as it once was, which indicates the grinding burrs may need to be replaced. These are unavoidable maintenance issues, regardless of the amount of cleaning and descaling cycles you run. We offer a comprehensive Jura repair and refurbishing service to get your machine operating at its peak capacity, again. Our flat fee service includes shipping to our facility, return shipping to the customer, all parts required for repair, brew group refurbishing, replacement of all O-rings, replacement of key parts as preventative maintenance, labor and a 12-month limited warranty**. Excludes Electronic Boards, Thermoblocks and broken External Housing parts irrelevant to the full functionality of the machine.
**Warranty Details

Our repair service is designed for customers experiencing one or more of the following malfunctions:

Malfunction Possible Causes
Jura Error 1 View
Jura Error 2 View
Jura Error 3 View
Jura Error 4 View
Jura Error 5 View
Jura Error 6 View
Jura Error 7 View
Jura Error 8 View
Jura Error 9 View
Jura Error 10 View
Jura Error 11 View
Jura Error 12 View
Jura Error 13 View
Jura Error 14 View
Jura Error 15 View
Jura Error 16 View
Jura Error 17 View
Jura Error 19 View
Jura Fill System Message View
Jura Fill Beans Message View
Leaking During Brew Cycle View
Leaking During Steam Cycle View
Not Producing Steam View
Coffee is not Dispensing through Spouts View
Coffee Grounds are Dry, No Coffee Dispensed View

JURA REPAIR SERVICE DETAILS

  • Brew Group Refurbishing

Over time, brew group seals will swell, dry or crack, which prohibits the brew group from returning to the home position or creating an airtight seal to build the proper amount of pressure to brew. If the brew group fails to return to the home position, or is unable to begin the brew process, an "error 8" message will appear. Furthermore, mold often accumulates around the drain valve and sometimes around the brew cup. For this reason alone, the brew group should be serviced every 1-2 years. We fully disassemble the brew group to clean and sanitize the components, lubricate appropriate moving parts and replace every seal.

  • Grinder Maintenance

Excess coffee grounds can compact in the grinder, preventing the optimum amount of coffee from entering the Brew Group. In addition, most machines we service have dull burrs after years of use. The result is weak, flavorless Espresso. We disassemble the grinder to clear out all the excess coffee, replace or re-calibrate burrs and lubricate the O-Ring seal.

  • Water Circuit Maintenance

All water contains microscopic minerals, which accumulate over time causing blockages and O-Rings to deteriorate. We visually check every PTFE hose, remove the grommet (metal insert) and flush the hose with compressed air. Then, we replace and lubricate every seal in the water circuit. Regulators, temperature sensors and outlet valves are replaced on every model as preventative maintenance.

  • Descaling and Cleaning

The final phase of our service involves Descaling and Cleaning the machine to ensure the coffee and steam thermoblocks are not clogged. Also, we clean the interior and exterior of the machine. We remove the coffee dispensing spout to clean and sanitize it. Excess coffee grounds accumulate in the spout, as well as the brew group. The moisture and coffee grounds create the perfect environment for bacteria and mold growth.

  • Service Time

Our current turnaround time is approximately 3-5 business days. Although it is rare, electrical problems or part availability may increase this turnaround time; however, the customer will be notified about any extended delay within 5 business days of the coffee machine being on the bench.


JURA REPAIR COSTS

The labor rates vary depending on the coffee machine model. The rates reflect the average cost to repair each specific model, which is calculated by the price and quantity of parts contained inside the specific models and the total labor involved in repairing the machine (i.e. a S9 contains twice as many hoses and seals as an E8). Shipping costs are factored into our pricing, as well.

Jura Coffee Machine Line Model Cost
Jura Impressa A-Line A1 - A5 - A7 - A9 $450
Jura Capresso-Impressa C-Line C5 - C9 - C60 - C65 $475
Jura Capresso-Impressa D-Line D4 - D6 - D60 $475
Jura Capresso-Impressa E-Line E4 - E6 - E8 - E8 P.E.P - E9 $475
Jura ENA-Line ENA3 - ENA4 - ENA5 - ENA7 - ENA8 - ENA9 $475
Jura ENA Micro-Line Micro1 - Micro5 - Micro8 - Micro9 - Micro90 $450
Jura Capresso-Impressa F-Line F7 - F8 - F9 - F50 - F60 $475
Jura GIGA-Line 5 - 6 - W3 - X3 - X7 - X8 - X9 $600
Jura Capresso-Impressa J-Line J5 - J6 - J7 - J9 - J80 - J85 - J90 - J95 $475
Jura Capresso-Impressa S-Line S7 - S8 - S8TFT - S9 $475-$550
Jura Professional WE-Line WE6 - WE8 $500
Jura Impressa X-Line X6 - X8 $550
Jura Capresso-Impressa Z-Line Z5 - Z6PEP - Z7 - Z8 - Z9 - Z10 $550

RESERVE AN APPOINTMENT

To reserve an appointment, click the button below to complete and submit the repair form. A customer service representative will email you a prepaid FedEx label to the address you provide for you to ship your machine to our facility. Print this label and place it on the box after your machine is packaged. There will be instructions attached to the email containing the label on where to drop off your machine or to schedule a pick-up.


PACKAGING INSTRUCTIONS

It is imperative to properly package your machine. Jura-Parts.com Co. will not insure in-bound machines, as we cannot ensure the machine is properly packaged. It is the customer's responsibility to purchase insurance, if desired. If insurance is not attached to the shipment, it is the customer's responsibility to file a claim with FedEx to be compensated for any damages while the parcel was in the possession of FedEx. Jura-Parts.com Co. will aid in the process of the claim by providing pictures of the box, damages the machine sustained and any additional documentation needed to file the claim; however, Jura-Parts.com Co. will not share in the expense of the damages in the form of credit, compensation or any expense incurred during the claim process. Additional shipping costs incurred due to not following our packaging instructions, or excessive packaging, will be added to the final invoice.

FedEx will package your machine for a fee at a branch location. You must provide the representative with these packing instructions to absolve yourself of any liability.

1. Use a 18x18x18 or 20x20x20 Heavy Duty or Certified Double Walled Box. A Singled Walled Box is not sufficient. DO NOT USE THE ORIGINAL JURA BOX.

2. Tape all seams of the bottom of the box: 3 pieces of tape sealing the center; 1 piece of tape across the top of each side seam; 1 piece of tape along the edge of each side seam.

3. Place a layer of packing peanuts on the bottom of the box.

4. Place a layer of bubble wrap over top the packing peanuts at the bottom of the box.

5. Remove all external parts (Drip Tray, Drip Tray Grid, Grounds Container, Grounds Container Tray and Water Tank). Do not ship with the machine. Wrap the entire machine with bubble wrap until the machine is not visible.

6. Place machine in the center of the box, making sure it is not contacting any of the box walls.

7. "Make a box, inside the box": Roll up bubble wrap into "pillars." Place these "pillars" upright on all 4 corners of the box. This will help stabilize the machine in the center of the box.

8. Use "filler" (i.e. packing peanuts) to further stabilize the machine in the center of the box. Stuff the packing peanuts down in between the machine and box walls to create a buffer zone.

9. Tape all seams of the bottom of the box: 3 pieces of tape sealing the center; 1 piece of tape across the top of each side seam; 1 piece of tape along the edge of each side seam.

10. Place prepaid printed
FedEx label on box.


PAYMENT OPTIONS

We accept several payment methods:

  • You may send a check for the total amount with your machine.
  • The check must be issued to Jura-Parts.com. The check will be deposited upon arrival of your machine. This does not indicate that the refurbishing process has begun. Once the check clears, your repair appointment is now guaranteed in the repair queue. If the check bounces, the customer will be responsible for all fees associated with the failed transaction, in addition to the total repair cost, prior to the machine being released. Note: This method ensures the quickest turnaround time.

  • You may pay with a credit card via a secure electronic invoice.
  • There is an additional $20 nonrefundable transaction fee for using a credit card. The customer will receive an electronic invoice via email to the address provided on the repair form. The invoice will be issued prior to a technician opening the machine. Customers who choose this method may experience a slightly extended turnaround time.


DOMESTIC SHIPPING POLICY

If you choose to ship us your machine for repair, we will email you a prepaid FedEx shipping label. You will receive FedEx shipping instructions with the label, which detail how to locate the closest FedEx drop off location. FedEx and small packaging stores will pack the machine for you (fees vary); however, please provide the representative with our packaging instructions and insist your machine is packaged according to our guidelines. Unfortunately, it has been our experience that most packaging stores do not properly pack these machines. For that reason, we do not insure in-bound machines. It is the customer's responsibility to purchase insurance, if desired. If a machine is damaged during return shipping to the customer, Jura-Parts.com Co. will file a claim with FedEx, email the customer a prepaid return label within 7 business days and repair/replace damaged parts.

Estimated Transit Time:

  • Northeast: 1-2 Business Days
  • South: 2-3 Business Days
  • Midwest: 3-5 Business Days
  • West: 4-6 Business Days

WARRANTY

These Terms & Conditions govern the service of repair by Jura-Parts.com Co. Jura-Parts.com Co. will service your Jura coffee machine as described and for the charges shown on the Work Authorization, plus any applicable tax. When the service is covered by Jura-Parts.com Co. warranty, extended service contract or consumer warranty law, those terms or applicable law will apply. Jura-Parts.com Co. understands that your saved preferences may be valuable to you. Data loss during service is always a possibility, and in some cases, be unrecoverable, erased, or reformatted during service. Jura-Parts.com Co. is not responsible for loss, recovery, or compromise of data, software, or loss of use of your product or other equipment arising out of the services provided by Jura-Parts.com Co. If service is needed due to failure of parts that are not original to the machine or due to damage caused by abuse, misuse or any external cause, failure to properly maintain the machine in accordance with our recommended cleaning procedures, Jura-Parts.com Co reserves the right to void any and all warranties in effect and return the machine to you without servicing it, and may hold you responsible for any indicated diagnostic fee. Jura-Parts.com Co will not be responsible for any damage to the product that occurs during the repair process that is a result of any unauthorized modifications or repairs or replacements not performed by Jura-Parts.com Co. If damage results, Jura-Parts.com Co. will seek your authorization for any additional costs for completing service even if the machine is covered by warranty. If you decline authorization, Jura-Parts.com Co. may return your machine in the damaged condition without any responsibility. If service requires labor and/or parts not specified on the Work Authorization, Jura-Parts.com Co. may seek your approval of a revised estimate. If you do not agree, Jura-Parts.com Co. may revise the charges and Jura-Parts.com Co. may return your machine and require payment for any indicated diagnostic fee.

Jura-Parts.com Co. may use parts that are new or equivalent to new in reliability and performance, as parts become obsolete. Jura-Parts.com Co. will retain the replaced part that is exchanged as its property, and the replacement part will become your property. Replaced parts are generally repairable and may be exchanged or repaired by Jura-Parts.com Co. for value. If applicable law requires Jura-Parts.com Co. to return a replaced part to you, you agree to pay Jura-Parts.com Co. the additional cost of the replacement item. When the machine is received by the designated transportation carrier, Jura-Parts.com Co. relinquishes all liability for any damaged, lost or stolen machines during transportation to or from our facility.

Jura-Parts.com Co. warrants for a period of ninety (90) days from the date of service (1) that service will be performed in a competent and workmanlike manner and (2) that all parts used to service your product will be free from defects in materials and workmanship, unless otherwise specified by Jura-Parts.com Co. The foregoing warranty is an express limited warranty and in the event of breach, Jura-Parts.com Co. will (i) re-perform the service, (ii) repair or replace the faulty part, or (iii) refund the cost of the service provided, less $175 tech fee, if the repair cannot be completed. Faulty Heating Elements and Electronic components are excluded from any and all warranties in effect. In order to claim under the warranty you must (i) notify Jura-Parts.com Co. to obtain a RMA number and (ii) email a video of the machine malfunctioning (iii) return your machine to Jura-Parts.com Co.

Jura-Parts.com Co. warrants for an extended period of one (9) months from the ending date of the initial ninety (90) warranty period (1) that service will be performed in a competent and workmanlike manner and (2) that all parts used to service your product will be free from defects in materials and workmanship, unless otherwise specified by Jura-Parts.com Co. The foregoing warranty is an express limited warranty and in the event of breach, Jura-Parts.com Co. will repair the machine for a flat fee of $175, which includes shipping, labor and parts required for the repair. Only parts responsible for improper function will be replaced. Faulty Heating Elements and Electronic components are excluded from any and all warranties in effect. In the event the machine is not repairable the $175 tech fee will be refunded, less shipping expenses.

THIS WARRANTY AND ASSOCIATED REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES, AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. JURA-PARTS.COM CO. SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF JURA-PARTS.COM CO. CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES, THEN ALL SUCH WARRANTIES ARE LIMITED IN DURATION TO THE EXPRESS LIMITED WARRANTY.TO THE MAXIMUM EXTENT PERMITTED BY LAW, JURA-PARTS.COM CO., WILL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM SERVICES PROVIDED OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; OR ANY COSTS OF RECOVERING, PROGRAMMING, OR RESTORING ANY PROGRAM OR DATA STORED OR USED WITH YOUR MACHINE. THE FOREGOING LIMITATION SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CLAIMS. JURA-PARTS.COM CO. SPECIFICALLY DOES NOT WARRANT THAT IT WILL BE ABLE TO (i) REPAIR OR REPLACE YOUR MACHINE WITHOUT RISK TO OR LOSS OF DATA. IF ANY MACHINE SHOULD BE DAMAGED OR LOST WHILE IN JURA-PARTS.COM CO. CUSTODY, JURA-PARTS.COM CO. LIABILITY WILL BE LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE AFFECTED MACHINE. OTHERWISE, JURA-PARTS.COM CO. LIABILITY FOR ANY AND ALL DAMAGE SHALL IN NO EVENT EXCEED THE PAYMENTS RECEIVED BY JURA-PARTS.COM CO. FOR SERVICES PROVIDED PURSUANT TO THESE TERMS. THE REMEDIES SET FORTH HEREIN SHALL BE YOUR SOLE AND EXCLUSIVE REMEDIES FOR ANY BREACH BY JURA-PARTS.COM CO. UNDER THESE TERMS AND CONDITIONS.

If you have not claimed your machine and paid all charges due within thirty (30) days after being notified by Jura-Parts.com Co. that your machine has been serviced, Jura-Parts.com Co. will consider your machine abandoned and may dispose of your machine in accordance with applicable law. Warranty is non-transferable.


CONTACT US

Please contact us via our ticket system with any questions regarding our repair service. Submit Ticket